![]() ![]() Adapter Dual 3.5 MM Headphone Plug Audio Cables Splitter Microphone 2 in 1 Swivel Connector 40. Going the otherway can be troublesome and if you get a direct or straight adapter instead of a wired adapter you can wallow out your headphone jack-port quickly. Splitter U/Audio Mic Connector Y Shape 3.5mm Jack to Dual Female Headset Spliter 2in1 2hole Mic Plug. Oh, and its easier to adapt from a 1/8" jack to 1/4". If you are a heavy user or are doing alot with audio you want to look at 1/4" and XLR (another topic entirely). TL DR If you are using portable audio equipment or using it less heavily you can get away with 1/8". That "datdatdat" sound/buzz you hear is interference from an induced electro magnetic field around the power strip which affects the magnetic coils inside your cans (headphones) or speakers (unless you have everything shielded) Just take a speaker or headphone near an electrical cord/ power strip. The Headphone/Microphone Combo Jack splitter (4-position 3.5mm to dual 3-position 3.5mm) is a headset Splitter Adapter featuring one 3.5mm Male (TRRS) and two 3.5mm (TRS) Female connectors, enabling you to add a mono microphone input, as well as a stereo output to your PC or Laptop, through a single 3.5mm audio port. Getting into the idea of wireless headphones and whatnot, they are okay however there can be alot of interference with wireless/bluetooth devices. Here's an AV post that explains Impedance Matching really well: Impedance matching is not as important now as it used to be in the past when setting up an audio system, but you can run more power through a larger jack than you can a smaller jack. Another reason for the 1/4" jack is IMPEDANCE MATCHING. This Headphone/Microphone Combo Jack splitter (4-position 3.5mm to dual 3-position 3.5mm) is a headset Splitter Adapter featuring one 3.5mm Male (TRRS) and two. ![]() I can't tell you how many 1/8" jacks I have accidentally managed to bend in my luggage or storing because I wasnt as careful with it as I should have been (especially with heavier equipment). Primarily is durability: a 1/4" jack and larger cable will break/bend less often than a small wire and jack. The 1/4" jack is the primary (unbalanced) jack of choice for the music industry while the 1/8" jack is king in personal electronics. As another responder already mentioned when things were miniaturized they had to drop the jack size. In fact many higher end headphones come now with adapters! That said, the big difference between the 1/4" and the 1/8" jacks comes from usability. I don't know anyone who has actually noticed an audio difference between 1/8" and 1/4" jacks on their headphones.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |